How to Install Car Magnets?
Written By: Nemilou Despuez | Article Date: October 14, 2024Car magnets are great promotional tools if you need signs that you can reuse or reapply. So, whether you have just one vehicle you use for business, or a large fleet of trucks, you may want to invest in these weather-proof, durable signs.
Unlike car decals and other adhesive stickers that are more permanent, car magnets are easy to install and remove. For this reason, they are the perfect choice for promoting events, candidates, limited-time offers, and seasonal products.
In this article, we explain the step-by-step guide on how to install car magnets correctly to ensure excellent adhesion.
How to Install Car Magnets: A Step-By-Step Guide
1. Put them on a flat magnetic surface for at least 24 hours before installation.These magnetic signs are typically rolled up during shipment to prevent damage, so it’s critical to do this preparation. Simply stick them to a fridge or a stainless-steel table.
2. Clean the surface where you’ll install the magnet.
Use a soft towel or a microfiber cloth to remove moisture, dust, grime, and other impurities. Make sure the surface is completely dry to ensure excellent adhesion.
3. Place the sign on a flat magnetic surface of your car.
Avoid moldings, trims, rusty spots, dents, uneven and curved areas, and plastic surfaces. During the actual installation, place one corner of the magnet against the surface and allow its natural pull to draw it into place.
4. Apply gentle pressure and get rid of the bubbles by smoothing out the edges and corners.
The goal here is to ensure perfect adhesion, allowing the signs to remain in place even in high winds or extreme weather conditions.
5. Clean your car magnets regularly.
You can wipe them a few times a week using a soft towel or microfiber. You may need to do more frequent cleaning during the rainy and winter season when roads are often treated with salt.
It’s also recommended to reposition the signs every now and then to expose the paint beneath to the sun. This way, it will look the same as the surrounding area. (UV rays make the car paint dull over time.)
Frequently Asked Questions About Car Magnets
Q:What can I do if the magnetic signs start to lose adhesion?
Clean the vehicle’s surface and the magnetic side using a soft cloth with rubbing alcohol. You can also use water with a mild detergent. The idea is to remove any dirt, debris, moisture, oil, and other impurities that weaken the magnetic force.
Q:How often should I clean my car magnets?
It is recommended to clean them a few times a week and after every rain or snowfall. They also require more frequent cleaning in winter when road salt is typically used to create safer driving conditions.
Q:What cleaning products can I use for car magnets?
You can use water with a mild detergent, or a soft cloth sprayed with a bit of rubbing alcohol to clean them. No need to buy expensive or strong cleaning products.
Q:Can I wash my car with magnetic signs on it?
We recommend removing the car magnets before washing your vehicle manually or going through a car wash. Although these magnetic signs are durable and waterproof, the brushes and water pressure may be strong enough to remove them from the surface. After washing your car, allow the surface to dry completely before reapplying the magnetic signs.
Q:How do I store car magnets when they’re not in use?
Keep them flat in a clean, dry place. Do not fold or roll them, place objects on top of them, or stack them back-to-back or side-to-side because doing so can weaken their magnetic strength over time.
Conclusion
With proper installation, your car magnets will stay in place even in high winds and during high-speed driving.Ready to print your custom car magnets? 48HourPrint uses 30 pt. magnets with a durable, weather-proof vinyl printed with UV-resistant ink to ensure that your graphics will remain vibrant for many years.